Millipore Sigma Vibrant Logo
Attention: We have moved. Merck Millipore products are no longer available for purchase on MerckMillipore.com.Learn More

KPGEG003FF3 Opticap® XL 300 Millipore Express® PHF Gamma Compatible 0.2 µm 3/4 in. TC/TC

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
KPGEG003FF3
3  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Description
Catalogue NumberKPGEG003FF3
Trade Name
  • Millipore Express®
DescriptionOpticap® XL 300 Millipore Express® PHF Gamma Compatible 0.2 µm 3/4 in. TC/TC
Product Information
Device ConfigurationCapsule
Connections, Inlet/Outlet19 mm (3/4 in.) Sanitary Flange
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
Housing MaterialPolypropylene (PP)
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 25 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaMillipore Express® PHF
SterilityGamma
Sterilization3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
Bacterial RetentionSamples of membrane used in this filter were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophilic
Physicochemical Information
Pore Size0.2 µm
Inlet ConnectionSanitary Flange
Outlet ConnectionSanitary Flange
Air Diffusion at 23 °C≤2.8 mL/min @ 2.8 bar (40 psig) in water
Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)80 psig
Maximum Differential Pressure5500 mbar (80 psi) @ 25 °C; 1000 bar (15 psi) @ 80 °C
Maximum Inlet Temperature25 °C
Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
TOC/ConductivityAfter sterilization and a controlled water flush of 2.5 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length4.7 in. (11.9 cm)
Length11.9 cm (4.7 in.)
Diameter5.6 cm (2.2 in.)
Filtration Area480 cm²
Inlet to Outlet Width11.9 cm (4.7 in.)
Inlet Connection Diameter3/4 in.
Outlet Connection Diameter3/4 in.
Materials Information
Chemistry
  • Polyethersulfone (PES)
Device Material
  • Gamma stable polypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolyethylene
Vent Cap MaterialPolypropylene (PP)
Packaging Information
Material Size3
Material PackageDouble Easy-Open bag
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Global Trade Item Number
Catalogue Number GTIN
KPGEG003FF3 04055977295047