CR75F1006 MilliporePolygard-CR Cartridge Filter 10 in. 75 µm Code F
Recommended Products
-
AB1557P Sigma-Aldrich Anti-NMDAR2B Antibody -
GA141711 Millipore Quikscale® Column GAP 140 x 550 -
17-677 Sigma-Aldrich ChIPAb+ Dimethyl-Histone H3 (Lys4) - ChIP Validated Antibody and Primer Set -
CC1047 Sigma-Aldrich MMP-13, human, proform, his-tagged, E. coli recombinant -
504744 Sigma-Aldrich InSolution™ Aphidicolin - CAS 38966-21-1 - Calbiochem -
14-461 Sigma-Aldrich IKKα Protein, active, 10 µg -
CVPY73PK1 Millipore Vitipore® II Plus Cartridge Filter 30 in. 0.65 µm Code 7 -
MPHL10CF3 Millipore Gamma Compatible Millipak®-100 Filter Unit 0.45 µm 3/4 in. TC/TC -
1047610100 Supelco Iodine -
MAB1510-I-100UG Sigma-Aldrich Anti-Ubiquitin Antibody, clone Ubi-1
Overview
| Description | |
|---|---|
| Catalogue Number | CR75F1006 |
| Trade Name |
|
| Description | Polygard-CR Cartridge Filter 10 in. 75 µm Code F |
| Product Information | |
|---|---|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | 4.8 bar (70 psid) @ 25 °C |
| Maximum Inlet Pressure, bar (psi) | 4.8 bar (70 psi) @ 25 °C |
| Cartridge Code | Code F double open end w/flat gaskets |
| Quality Level | MQ400 |
| Physicochemical Information | |
|---|---|
| Pore Size | 75.0 µm |
| Gravimetric Extractables | ≤50 mg after 24-h soak in water |
| Dimensions | |
|---|---|
| Cartridge Nominal Length | 10 in. (25 cm) |
| Diameter | 7.0 cm (2.75 in.) |
| Nominal Pore Size | 75.0 µm |
| Materials Information | |
|---|---|
| Chemistry |
|
| Device Material |
|
| Seal Material | Polyethylene (PE) |
| Packaging Information | |
|---|---|
| Material Size | 6 |
| Specifications | |
|---|---|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L |
| Global Trade Item Number | |
|---|---|
| Catalogue Number | GTIN |
| CR75F1006 | 04053252713767 |
